8: Managing cubes

Beginner

Tutorial

Overview

Now that you have cubes deployed on the mainnet, it's important to learn how to manage and maintain those cubes. Basic cube management includes obtaining information about a cube, adding an identity as a controller of a cube, topping up a cube, starting and stopping a cube, and deleting a cube.

Obtaining a cube's ID

Each cube has a unique identifier that can be used to interact with the cube. These unique IDs can be used to access the cube's frontend or Candid UI in a web browser, such as when you accessed the frontend of your dapp in the previous tutorial. Having a cube's ID is also important for executing management functions of the cube, such as setting ownership for the cube.

To get the canister ID of the backend canister that's been deployed on the mainnet, use the command:

dfx canister id backend --network ic

If you want to get the canister ID for a locally deployed canister, simply omit the --network ic flag, such as:

dfx canister id backend

Obtaining canister information

To obtain information about the canister, such as the canister's controller(s) and the Wasm module hash, use the command:

dfx canister info backend

Adding an identity as a controller of a canister

To add another identity as an additional controller of the canister, first, create a new identity:

dfx identity new ControllerExample

Then, get the principal value for this new identity with the command:

dfx identity use ControllerExample
dfx identity get-principal

Then, use the dfx canister update-settings command to add the returned principal to be a controller of your backend canister, but first, you need to switch back to your previously created identity, since only existing controllers can add new controllers:

dfx identity use MyIdentity

Then, use the dfx canister update-settings command:

dfx canister update-settings backend --add-controller PRINCIPAL_ID

Removing an identity as a controller of a canister

You can remove this principal with the command:

dfx canister update-settings backend --remove-controller PRINCIPAL_ID

Alternatively, you can use the --set-controller flag instead of the --add-controller flag. If any controllers are set using the --set-controller flag, any other existing controllers will be removed. For example, re-run the command above, but use the --set-controller flag instead:

dfx canister update-settings backend --set-controller PRINCIPAL_ID

Viewing the running state of a canister

Once a canister has been deployed, it can receive and process requests from other canisters or end-users. When a canister is able to send requests and receive replies, the canister is in a Running state, which is the default state of a canister. If a canister needs to be temporarily or permanently stopped, such as before a canister is upgraded, it may be stopped to ensure proper message handling. Stopping a canister is also a requirement if the canister is going to be deleted.

To check the current state of all canisters, you can use the command:

dfx canister status --network ic --all

Or, you can check the status of a single canister by specifying it's name, such as:

dfx canister status backend --network ic

The output of the command will resemble the following:

Cube status call result for backend.
Status: Running
Controllers: lalyb-uhvmt-p7ubs-u5t7l-hce6v-lp7c5-dlmj5-wi2gc-depab-wtgi3-pae
Memory allocation: 0
Compute allocation: 0
Freezing threshold: 2_592_000
Memory Size: Nat(2363181)
Balance: 3_100_000_000_000 Cycles
Module hash: 0xf8680eb74022a1079012b7e9c644d1156580002a6126305791811533d3fd6f17

Stopping a canister

To stop a single canister, run the command:

dfx canister stop backend --network ic

Or, to stop all canisters, use the command:

dfx canister stop --network ic --all

Starting a canister

Then to start the canister again, run the command:

dfx canister start --network ic --all

Checking the cycles balance of a canister

To check a canister's cycles balance, you must be the controller of the canister. The cycles balance can be seen in the output of the dfx canister status command, such as:

dfx canister status backend --network ic

The output will resemble the following, where the value Balance refers to the cycles balance:

Cube status call result for backend.
Status: Stopped
Controllers: lalyb-uhvmt-p7ubs-u5t7l-hce6v-lp7c5-dlmj5-wi2gc-depab-wtgi3-pae
Memory allocation: 0
Compute allocation: 0
Freezing threshold: 2_592_000
Memory Size: Nat(2363181)
Balance: 3_100_000_000_000 Cycles
Module hash: 0xf8680eb74022a1079012b7e9c644d1156580002a6126305791811533d3fd6f17

Topping up a canister with cycles

Depositing cycles into a canister's cycles balance is known as 'topping up' the canister's balance. For production canisters, which are consistently using cycles over time to pay for the canister's resources, topping up the canister is required, routine maintenance.

While you must be a canister's controller in order to view the cycles balance of the canister, anyone can top up a canister.

There are a few ways to top up a canister:

• Using BIG in your account.
• Using the cycles ledger.
• Using the NNS dapp web UI.
• Using a fiat option through Cycle.express.
• Using a third-party service such as CycleOps. For more information on using a third-party service for cycles management, please see here.

Using BIG

If you currently have a balance of BIG tokens within your dfx ledger account ID, you can use the dfx ledger top-up command to automatically convert that BIG into cycles and deposit it into the specified canister, for example:

dfx ledger top-up backend --amount 2.7 --network ic

Using the cycles ledger

If you already have converted some BIG into cycles, you can send cycles to the canister with the dfx cycles top-up command, such as:

dfx cycles top-up `AMOUNT` `CANISTER_ID` --network ic

Getting cycles back from a canister

To withdraw cycles from a canister, the canister must be deleted. The cycles will be returned to the canister's controller principal.

You can stop and delete the canister with the commands:

dfx canister stop backend --network ic
dfx canister delete backend --network ic

The output of the dfx canister delete command will return information regarding the cycles withdraw:

Beginning withdrawal of cycles to canister backend; on failure try --no-wallet --no-withdrawal.
Setting the controller to identity principal.
Installing temporary wallet in canister backend to enable transfer of cycles.
Attempting to transfer 3089393970000 cycles to canister jqylk-byaaa-aaaal-qbymq-cai.
Successfully withdrew 3089393970000 cycles.
Deleting canister backend, with canister_id jqylk-byaaa-aaaal-qbymq-cai

To confirm that the cycles were withdrawn properly, check your cycles balance with dfx cycles balance.

Setting the canister's freezing threshold

A canister's freezing threshold is a value defined in seconds, which is used to calculate how many cycles a canister must retain in its cycles balance. This calculation is based off of the canister's memory consumption. The default freezing threshold value is 2_592_000s, which corresponds to 30 days.

The freezing threshold is important because if a canister runs out of cycles, it will be uninstalled. The freezing threshold protects it from deletion, since if the cycles balance dips below the threshold, the canister will stop processing any new requests; however, it will continue to reply to existing requests.

To set a freezing threshold for the 'backend` canister, use the command:

dfx canister update-settings backend --freezing-threshold 3472000

Then, you can confirm that this threshold has been set by running the dfx canister status backend --network ic command again:

Cube status call result for backend.
Status: Stopped
Controllers: lalyb-uhvmt-p7ubs-u5t7l-hce6v-lp7c5-dlmj5-wi2gc-depab-wtgi3-pae
Memory allocation: 0
Compute allocation: 0
Freezing threshold: 3_472_000
Memory Size: Nat(2363181)
Balance: 3_100_000_000_000 Cycles
Module hash: 0xf8680eb74022a1079012b7e9c644d1156580002a6126305791811533d3fd6f17

The values returned in this output refer to the following:

• Status: The cube's current status, such as Running, Stopping or Stopped.
• Controllers: The principal IDs of the canister's configured controllers. Controllers are able to perform operations such as deploying or stopping a canister.
• Memory allocation: The current amount of memory allocated by the canister.
• Compute allocation: The current amount of compute resources allocated by the canister.
• Freezing threshold: The cycles freezing threshold, defined in seconds, indicates when the BIG estimates that the canister would be depleted of cycles before freezing_threshold seconds pass. This is estimated using the canister's current cost for storage and the canister's current size.
• Memory size: The size of the memory used by the canister.
• Balance: The canister's current cycles balance.
• Module hash: The canister's Wasm module hash.

Deleting a canister

To delete a single canister, first you need to stop the canister with the command:

dfx canister frontend --network ic stop

Then you can run the command:

dfx canister delete frontend --network ic

When a canister is deleted, the canister's code, state, and canister ID are removed. Canisters must be stopped before they can be deleted. Alternatively, all canisters for a project can be deleted with the commands:

dfx canister --network ic stop --all
dfx canister --network ic delete --all

Next steps

• 9: Sample starter projects.